Epoxy Conductive Adhesive DT1204-D

Description

DT1204-D is a one-component conductive adhesive consist of silver powder and epoxy. It is non-toxic element up to European RoHS environmental regulation.(2002/95/EC) The curing temperature is not high,This is the difference part with soldering,. It has features of good weldability, excellent ageing resistance, and good conductivity. It is suit for the connected and fixed on screen printed circuit boards¡¢crystal¡¢LED ext. And it is widely used in aerospace, microwave, radar, computer, automotive electronic,consumer electronic and other field.

Typical Properties

Performance

Colour

Silver white

Silver content

70%-80%

Solide content

75%-90%

Viscosity

30¡À10Pa•s( 10 rpm, 25¡ãC¡À0.5¡ãC)

Fineness

£¼16¦Ìm

Hardness

¡Ý2H

Type

250-325mesh screen printed or Dispensing

Curing

120¡ãC/60mins,150¡ãC/30mins,170¡ãC/10mins

Volume resistivity

¡Ü1.5¡Á10-4¦¸¡¤cm£¨150¡ãC/30mins£©

Shearing Strength

¡Ý4MPa(stainless steel-stainless steel)

¡¡

Notice of Usage And Storage

1.The required storage temperature is below 0 degree..

2. Avoid being affected by moisture when remove tour refrigerator, it must place in a desiccator for 1 hour before useing.

3.Fully mixing before useing.

4.After opening the lid,it is recommended to shorten the exposure time in the air. And best contents within three days after opening.

¡¡