Silver Paste For Vehicle Window Defogging DT557X

DT557X is a silver paste designed for vehicle front window defogging. It is non-toxic up to European RoHS environmental regulation(2002/95/EC). It has features of strong adhesive power, good weldability, excellent ageing resistance, small range of resistance with long-time printing, and have good compatibilities with black galzed.

 

Paste trait

Model

DT5571

DT5572

DT5573

DT5574

DT5575

Silver Content（％）

80

75

70

65

60

Viscosity

60±25 Pa·s( 10 rpm, 25°C±0.5°C)

Fineness

＜20μm

Solid Content

82±2%

80±2%

78±2%

76±2%

72±2%

Printability Silk-screen

150～250 polyester screen

Leveling Time

at room temperature，2～3minutes

Drying

150～180°C /( 3 minutes)

Firing

600～650°C/>10 minutes

Film Thickness (μm)

8-15μm

Conductivity (mΩ/sq)

≤4

≤6

≤7

≤9

≤12

Stability of Resistor

Good

Adhesion ( N )

≥130

≥130

≥110

≥110

≥80

 

Testing Standard

NO.

ITEM

NO.

ITEM

01

ABRASE TEST

07

WATER RESISTANCE

02

ABRASE TEST

08

COLD HEAT WET

03

(0.1N NaOH )MEDICINAL RESITANCE

09

WET RESISTANCE

04

MEDICINAL RESISTANCE(90# gas)

10

HEAT RESISTANCE

05

MEDICINAL RESISTANCE(alky of thinner)

11

BRINE GUSHING

06

MEDICINAL RESISTANCE(wash of window)

12

S-WOM

 

Features

●  Maximization of the range of temperature of sintering

●  Strong adhesive force,good weldability,excellent ageing resistance

●  Small change of resistance with long-time printing,and have good compatibilities with black glaze

●  Low technical sensitivity,highly passing rate of products

●  Non-toxic,RoHS compliant

 

Notice of usage and storage:

1.  The used material should be collected and sealed up alone. Don’t mix with other untapped material.

2.  Before using the paste, it is essential to take out of from icebox or icehouse firstly and place it at about 25℃. Keep stir it slowly and fully till the composition of this paste is uniform.

3.    It should be guarantee that the room temperature and appliance temperature remains 26±2℃ during printing.

4.    Paste material placed on the screen should be moderate and added regularly when making screen-printing.

5.    Dilute the paste moderately to recover the printing performance.

6.    The storage temperature is recommended between 5 and 25℃. The shelf time is commonly 6 months.

7.    Please test for products suitability before mass production to avoid causing unnecessary losses.